Here is a great beginner sewing project that only requires a few supplies and can be completed in about 30 minutes. This See Kate Sew bandana bib tutorial will show you how to make your own drool-proof bib for your baby or toddler using just a little bit of fabric and some Velcro.
What You’ll Need
To make your own bandana bib, you’ll need:
-1/2 yard of cotton fabric (I like to use quilting cotton)
-1/4 yard of coordinating bias tape
That’s it! You can find all of these supplies at your local fabric store.
Cut Out Your Pieces
Kate Sew shows us how to make a bandana bib in this quick and easy tutorial. The first step is to cut out your pieces. You’ll need two rectangles of fabric, each about 18″x14″. Cut one piece of interfacing that is the same size as the smaller rectangle of fabric.
Sew the Top Edge
Now that you have your two pieces of fabric cut out, it’s time to sew the top edge. Place the two pieces of fabric right sides together and sew along the top edge with a 1/4″ seam allowance. I like to use a serger for this step, but you can also use a regular sewing machine.
After you’ve sewn the top edge, turn the bib right side out and press the seam. Then, topstitch along the seam to secure it.
Now your bib is almost complete! Just one more step to go.
Sew the Bottom Edge
Sewing the bottom edge of your bandana bib is quick and easy! Start by folding the fabric over 1/4 inch, then again 1/4 inch. Pin in place, then sew along the edge using a straight stitch. Repeat for the other side.
Now you’ve sewn the bottom edge of your bandana bib! Wasn’t that easy?
Sew the Sides
Now it’s time to sew the sides of your bib. Start by folding the fabric in half, right sides together. Pin the two sides together, then sew along the edge with a straight stitch. Be sure to backstitch at the beginning and end of your seam.
Now it’s time to turn your bib right side out. Reach into one of the side openings and grab hold of the fabric on the other side. Gently pull it through until the bib is turned right side out. Use a chopstick or other pointed object to poke out the corners.
Once your bib is turned right side out, press it flat with an iron. Then topstitch along both sides of the bib, about 1/4″ from the edge. This will help to keep the fabric from fraying and will give your bib a nice finished look.
Congratulations! You’ve now completed your very own bandana bib. Wasn’t that easy?
Add Snaps or Velcro
Adding snaps or velcro to your bandana bib is a quick and easy way to make it more adjustable and secure. Simply sew the snaps or velcro onto the bib where you want them. Be sure to test the fit before you finish sewing the bandana bib so that you can adjust the placement of the snaps or velcro as needed.
Sew A See Kate Sew Bandana Bib
This is a quick and easy tutorial for sewing a See Kate Sew bandana bib. You will need:
-1/4 yard of cotton or other absorbent fabric
-1/4 yard of water-resistant fabric
First, cut your fabrics into 18″x18″ squares. Then, fold the bandana in half and place it on top of the wrong side of the cotton square. Pin in place.
Next, use a sewing machine to stitch around the perimeter of the bandana, leaving a 1/4″ seam allowance. Be sure to backstitch at the beginning and end of your stitching.
Now, place the water-resistant square on top of the bandana (right sides together) and pin in place. Stitch around the perimeter of the square, again leaving a 1/4″ seam allowance. Again, be sure to backstitch at the beginning and end of your stitching.
Finally, turn your bib right side out and press flat. That’s it! You’ve now made a cute and functional bib for your little one – or for yourself!
See Kate Sew | Best Bandana Bib For Kids
If you’re looking for a quick and easy way to make a bandana bib for your child, then you need to check out See Kate Sew Bandana bib tutorial. This step-by-step guide takes you through everything you need to know to make a stylish and functional bib that will keep your little one clean and dry.
What’s great about this tutorial is that it doesn’t require any special sewing skills or knowledge – all you need is a basic understanding of how to use a sewing machine. And even if you’ve never used a sewing machine before, don’t worry – the instructions are clear and easy to follow.
So why not give it a try? You might be surprised at how easy it is to make a beautiful bandana bib that your child will love.
How To Sew A Bandana Bib
If you’re looking for a quick and easy sewing project, why not try making a bandana bib? They’re perfect for drooling babies (and make great gifts!) and only take a few minutes to sew. Here’s a quick tutorial on how to make your own bandana bib:
1. Cut two rectangles out of your fabric. They should be about 18″x13″ for an infant-sized bib, or 22″x16″ for a toddler-sized bib.
2. Place the rectangles right sides together and sew around the edges, leaving an opening for turning.
3. Trim the corners and turn the bib right side out. Press flat.
4. Topstitch around the entire perimeter of the bib to close the opening and give it a nice finished look.
5. That’s it! Your bandana bib is now complete.
See Kate Sew A Collection of Bandana Bibs
If you’re looking for an easy and cute way to dress up your baby, try a bandana bib! See Kate Sew Bandana bib has a great tutorial on how to make your own bandana bibs. You can find the tutorial here:
This project is perfect for beginners, and only requires a few supplies. All you need is some cotton fabric, bias tape, and velcro. You can even use up some fabric scraps that you have lying around.
Bandana bibs are not only cute, but they’re also functional. They help to keep your baby’s clothes clean, and they’re absorbent too. So if your little one is drooling or spilling, you don’t have to worry about their clothes getting ruined.
This is such a quick and easy project, you’ll be able to make several bibs in no time at all! So why not whip up a few for yourself, or as gifts for friends?
How To Sew A Bandana Bib For Your Little One
Is your little one always drooling and making a mess? A bandana bib is the perfect solution! Not only are they super cute, but they’re also quick and easy to make. Check out this tutorial to see how it’s done.
-1/2 yard of cotton fabric (preferably prewashed)
-1/4 yard of velcro
First, cut your fabric into two rectangles measuring 18″x13″. Then, fold each rectangle in half lengthwise and press.
Next, use a zigzag stitch or serger to finish all four raw edges of the fabric. This will help prevent fraying.
Now it’s time to construct the bib. Place the two rectangles right sides together and sew around the perimeter, leaving a 3″ opening for turning. Clip the corners and turn the bib right side out. Press well.
To finish, topstitch around the entire perimeter of the bib. This will help close up that turning hole. Finally, add velcro to the back neckline so that it can be easily put on and taken off
Make A Bandana Bib Like See Kate Sew bandana bib
Looking for a fun and easy sewing project? Why not make a bandana bib like the ones from See Kate Sew Bandana bib? This quick and easy tutorial will show you how!
-1/2 yard of cotton or flannel fabric (pre-washed)
-1/4 yard of terry cloth or other absorbent fabric (pre-washed)
-iron & ironing board
First, cut your fabric into two rectangles. For the main bib body, you’ll want to cut a rectangle that’s about 9″ x 17″. For the absorbent backing, cut a rectangle that’s about 7″ x 15″.
Next, hem all four sides of both rectangles. To do this, simply fold over each side by 1/4″, press with an iron, and then stitch close to the edge with a sewing machine.
Now it’s time to assemble the bib! Place the terry cloth backing piece on top of the main bib body piece, right sides together. Pin in place, and then stitch around all four sides, leaving a 3″ opening at the top of the b
See Kate Sew Bandana Bib – Perfect For Baby’s Messy Meals
If you’re looking for a quick and easy sewing project, why not try your hand at making a bandana bib? These cute little bibs are perfect for protecting baby’s clothes from messy mealtimes, and they’re so easy to make!
To get started, you’ll need:
-1/2 yard of cotton fabric (preferably quilting weight)
-1/2 yard of terry cloth or other absorbent fabric
-a sewing machine
-a few safety pins
-a bias tape maker (optional but helpful)
First, cut your fabric into two equal pieces. Then, use a rotary cutter or scissors to create a curved edge along one side of each piece of fabric. Next, lay the two pieces of fabric wrong sides together and pin them in place. Sew around the perimeter of the fabric, leaving a small opening for turning.
After that, turn the bib right side out and press it flat. Topstitch around the entire edge of the bib to close the opening. Now it’s time to add the terry cloth backing. Cut a piece of terry cloth that is slightly smaller
This bandana bib tutorial is a quick and easy way to make a stylish and functional bib for your little one. Not only is this tutorial easy to follow, but it also results in a beautiful and unique bib that your child will love. Give this project a try the next time you’re looking for a quick sewing project, you won’t be disappointed!